NETGEAR Nighthawk RS700 User Manual page 17

Table 1. LED descriptions (Continued)
LED and Button
3. LAN 10G LED
4. Ethernet LAN ports 1–4
LEDs
5. USB 3.0 port LED
6. 2.4 GHz WiFi LED
7. 5 GHz WiFi LED
8. 6 GHz WiFi LED
Hardware Setup
Nighthawk WiFi 7 Tri-Band Router Model RS700
Description
The LED color indicates the speed of the 10G LAN port: white for a 10 Gbps
Ethernet connection and amber for an Ethernet connection lower than 10 Gbps.
Solid white: The router detected a 10 Gbps link with a powered-on device.
Blinking white: The port is sending or receiving traffic at 10 Gbps.
Solid amber: The router detected a 5 Gbps, 2.5 Gbps, 1 Gbps, or 100 Mbps link
with a powered-on device.
Blinking amber: The port is sending or receiving traffic at 5 Gbps, 2.5 Gbps,
1 Gbps, or 100 Mbps.
Off: No device is connected to this Ethernet LAN port.
The LED color indicates the speed of the Ethernet connection at each LAN port:
white for a Gigabit Ethernet connection and amber for an Ethernet connection
lower than 1 Gbps.
Solid white: The router detected a 1 Gbps link with a powered-on device.
Blinking white: The port is sending or receiving traffic at 1 Gbps.
Solid amber: The router detected a 100 Mbps or 10 Mbps link with a powered-on
device.
Blinking amber: The port is sending or receiving traffic at 100 Mbps or 10 Mbps.
Off: No device is connected to this Ethernet LAN port.
Solid white: A USB device is connected to the USB 3.0. port.
Blinking white: The USB 3.0 port is sending or receiving traffic.
Off: No USB device is connected to the USB 3.0 port.
Solid white: The 2.4 GHz WiFi radio is operating.
Off: The 2.4 GHz WiFi radio is off.
Solid white: The 5 GHz WiFi radio is operating.
Off: The 5 GHz WiFi radio is off.
Solid white: The 6 GHz WiFi radio is operating.
Off: The 6 GHz WiFi radio is off.
17 User Manual