NETGEAR Nighthawk RS700 User Manual page 152

The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Backup Settings.
The Backup Settings page displays.
5. Click the Erase button.
The configuration is reset to factory default settings. When the reset is complete,
the router restarts. This process takes about two minutes.
WARNING:
the reset. For example, do not close the browser, click a link, or load a new
page. Do not turn off the router. Wait until the router finishes restarting.
Manage and Monitor Your
Router
Nighthawk WiFi 7 Tri-Band Router Model RS700
To avoid the risk of corrupting the firmware, do not interrupt
152 User Manual