View The Internet Traffic Volume And Statistics - NETGEAR Nighthawk RS700 User Manual

7. In the Monthly limit field, enter how many hours per month are allowed.
8. In the Traffic Counter section, set the traffic counter to begin at a specific time and
date.
9. In the Traffic Control section, enter a value in minutes to specify when the router
issues a warning message before the monthly limit in hours is reached.
This setting is optional. The router issues a warning when the balance falls under the
number of minutes that you enter. By default, the value is 0 and no warning message
is issued.
10. Select one or more of the following actions to occur when the limit is reached:
• Turn the Internet LED to flashing amber: This setting is optional. When the
traffic limit is reached, the Internet LED blinks amber.
• Disconnect and disable the Internet connection: This setting is optional. When
the traffic limit is reached, the Internet connection is disconnected and disabled.
11. Click the Apply button.
Your settings are saved.
The Internet Traffic Statistics section helps you to monitor data traffic. For more
information, see View the Internet traffic volume and statistics on page 144.

View the Internet traffic volume and statistics

If you enabled the traffic meter (see Start the traffic meter without traffic volume
restrictions on page 141), you can view the Internet traffic volume and statistics.
To view the Internet traffic volume and statistics shown by the traffic meter:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Traffic Meter.
Manage and Monitor Your
Router
Nighthawk WiFi 7 Tri-Band Router Model RS700
144 User Manual