Manage The Firmware Update Settings - NETGEAR Nighthawk RS700 User Manual

7. Select the Manual Update tab.
The Manual Update page displays.
8. Click the Browse button.
9. Find and select the firmware file on your computer.
10. Click the Upload button.
The router begins the upload.
WARNING:
the upload. For example, do not close the browser, click a link, or load a
new page. Do not turn off the router.
When the upload is complete, your router restarts. The upload process typically
takes about one minute.

Manage the firmware update settings

You can set the router to automatically update to future firmware versions as they become
available.
To manage automatic updates for future firmware versions:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Router Update.
The Router Update page displays.
5. In the Router Auto Firmware Update section, select one of the following radio buttons.
• Enable: The router automatically updates to future firmware versions as they
become available. This is the default setting. We recommend that you keep this
Manage and Monitor Your
Router
Nighthawk WiFi 7 Tri-Band Router Model RS700
To avoid the risk of corrupting the firmware, do not interrupt
126 User Manual