Set Up A Bridge For A Vlan Tag Group - NETGEAR Nighthawk RS700 User Manual

NOTE: You must select at least one Wired Ports or Wireless check box.
You can select more than one check box. Depending on your configuration,
other devices connected to the specified ports or WiFi networks might not
be able to access the public Internet.
8. Click the Apply button.
Your settings are saved.

Set up a bridge for a VLAN tag group

If the devices that are connected to the router's Ethernet LAN ports or WiFi network
include an IPTV device, your ISP might require you to set up a bridge for the IPTV device
and the router's Internet interface with a virtual local area network (VLAN) tag.
If you are subscribed to IPTV service, the router might require VLAN tags to distinguish
between the Internet traffic and the IPTV traffic. A bridge with a VLAN tag group prevents
packets that are sent between the IPTV device and the router's Internet port from being
processed through the router's network address translation (NAT) service.
You can add VLAN tag groups to a bridge and assign VLAN IDs and priority values to
each VLAN tag group.
To add a VLAN tag group and enable the bridge:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > VLAN / Bridge Settings.
The VLAN / Bridge Settings page displays.
5. Select the Enable VLAN / Bridge Settings check box.
The page expands.
Manage the WAN and LAN
Network Settings
Nighthawk WiFi 7 Tri-Band Router Model RS700
110 User Manual