Table of Contents
Advertisement
Fan
Description
For use only on computer models equipped with an AMD processor
For use only on computer models equipped with an Intel processor
Before removing the fan, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the service cover (see
a.
Battery (see
b.
Hard drive (see
c.
Keyboard (see
d.
Top cover (see
e.
Heat sink (see
Remove the fan:
1.
Turn the top cover upside down with the front toward you.
2.
Disconnect the fan cable (1) from the system board.
3.
Loosen the two Phillips captive screws (2) that secure the fan to the system board.
Service cover on page
Battery on page
69)
Hard drive on page
71)
Keyboard on page
81)
Top cover on page
89)
Heat sink on page
103)
67), and then remove the following components:
Component replacement procedures 105
Spare part number
780895-001
730547-001
Advertisement
Table of Contents
