Table of Contents
Advertisement
1.10 REMOTE CONTROLS AND ROOM CHRONO-THERMOSTATS (OPTIONAL)
The appliance is set up for room chrono-thermostats or remote controls, available as optional kits.
Carefully read the user and assembly instructions contained in the accessory kit.
Disconnect power to the unit before making any electrical connections.
On/Off Immergas digital chrono-thermostat.
The chrono-thermostat allows:
- set two room temperature value: one for day (comfort temperature) and one for night (reduced temperature);
- set a weekly programme with four daily switch on and switch off times;
- selecting the required function mode from the various possible alternatives:
• manual mode (with adjustable temperature);
• automatic mode (with set programme);
• forced automatic operation (momentarily changing the temperature of the automatic program).
The chrono-thermostat is powered by two 1.5V LR 6 type alkaline batteries.
"Comando Amico Remoto" (Remote Control Device)
In addition to the functions described in the previous point, the CAR
regarding operation of the appliance and the heating system with the opportunity to easily intervene on the previously set parameters,
without having to go to where the appliance is installed.
The panel is equipped with self-diagnosis to show any appliance operating anomalies on the display.
The climate chrono-thermostat incorporated into the remote panel enables the system flow temperature to be adjusted to the actual
needs of the room being heated, in order to obtain the desired room temperature with extreme precision and therefore with evident sav-
ing in running costs.
"Comando Amico Remoto" (Remote Control Device)
The operations described below must be performed after having removed the voltage from the
appliance.
Any room thermostat On/Off must be connected to terminals 44/40 and 41 by removing the X40 link (Fig. 54).
Make sure that the On/Off thermostat contact is of the "clean" type, i.e. independent of the mains voltage, otherwise the P.C.B. would be
damaged.
Any Comando Amico Remoto remote control
Fig. 54).
The boiler can only be connected to one remote control.
If the Comando Amico Remoto remote control
compliance with current regulations regarding electrical systems.
No appliance pipes must ever be used to earth the electric system or telephone lines.
Ensure elimination of this risk before making the appliance electrical connections.
(CAR
) with climate chrono-thermostat function.
V2
V2
panel enables the user to control all the important information
V2
or On/Off chrono-thermostat electrical connection (Optional).
V2
must be connected to terminals 44/40 and 41, eliminating jumper X40 on the P.C.B. (
V2
or any other On/Off chrono-thermostat is used arrange two separate lines in
V2
25
Advertisement
Table of Contents
