Table of Contents
Advertisement
Power connector cable
Table 6-11
Power connector cable description and part number
Description
Power connector cable
Before removing the power connector cable, follow these steps:
1.
Prepare the computer for disassembly
2.
Place the computer in Battery Safe mode
3.
Remove the bottom cover
4.
Remove the battery
5.
Remove the display
Remove the power connector cable:
1.
Disconnect the cable from the system board (1).
2.
Use a tool (2) to lever the connector up and out of the computer (3).
Reverse this procedure to install the power connector cable.
64
Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
(Battery Safe mode on page
(Bottom cover on page
(Battery on page
40).
(Display assembly on page
31).
32).
57).
Spare part number
L01048-001
31).
Advertisement
Table of Contents
