Table of Contents
Advertisement
14.
Lift the hinges from the enclosure (3).
The display hinges are available as spare part number L44566-001.
15.
If it is necessary to replace the WLAN antennas, remove the cables from the clips in the bottom of the
enclosure (1), and then peel the antennas and remove them from the display enclosure (2).
WLAN antennas are available using the following spare part numbers:
L44583-001: Single antenna
L44584-001: Dual antennas
16.
If it is necessary to remove or replace the display/camera cable, use the following steps:
Displays with an IR camera
a.
Disconnect the cable from the ZIF connector on both ends of the camera module (1).
62
Chapter 6 Removal and replacement procedures for authorized service provider parts
Advertisement
Table of Contents
