Connecting A 1394 Device; Removing A 1394 Device; Using An Esata Device (Select Models Only); Connecting An Esata Device - HP Mini 1103 Reference Manual

Connecting a 1394 device

CAUTION:
device.
To connect a 1394 device to the computer, connect the 1394 cable for the device to the 1394
▲
port.
You will hear a sound when the device has been detected.

Removing a 1394 device

CAUTION:
before removing it.
CAUTION:
1394 device.
1. To remove a 1394 device, save your information and close all programs associated with the device.
2. Click the remove hardware icon in the notification area, at the far right of the taskbar, and then
follow the on-screen instructions.
3. Remove the device.

Using an eSATA device (select models only)

An eSATA port connects an optional high-performance eSATA component, such as an eSATA external
hard drive.
Some eSATA devices may require additional support software, which is usually included with the device.
For more information about device-specific software, refer to the manufacturer's instructions.
NOTE: The eSATA port also supports an optional USB device.

Connecting an eSATA device

CAUTION:
the device.
To reduce the risk of damage to a 1394 port connector, use minimal force to connect the
To reduce the risk of loss of information or an unresponsive system, stop the 1394 device
To reduce the risk of damage to a 1394 connector, do not pull on the cable to remove the
To reduce the risk of damage to an eSATA port connector, use minimal force to connect
Using an eSATA device (select models only) 37