HP ENVY x360 Maintenance And Service Manual page 45

2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the display assembly:
1. Remove the WLAN module antenna cover (1) that secures the WLAN antenna cables to the WLAN
module.
The WLAN module antenna cover is available using spare part number N41046-001.
2. Carefully disconnect the two WLAN antenna cables (2) from the terminals on the WLAN module.
Computer models have either one or two WLAN antennas. On models with two antennas, the #1
WLAN antenna cable connects to the WLAN module #1 Main terminal. The #2 WLAN antenna cable
connects to the WLAN module #2 Aux terminal.
3. Release the WLAN antenna cables from the retention clip (3) that is built into the computer.
4. Disconnect the camera module cable (1) from the system board.
5. Disconnect the display panel module cable (2) from the system board.
Bottom cover on page 30).
Battery on page 31).
Display assembly 39