Main - HP Aspire one Series Service Manual

Main

The Main screen allows the user to set the system time and date as well as enable and disable boot option
and recovery.
Information Main
System Time: System Time:
System Date: System Date:
Total Memory: Total Memory:
Video Memory: Video Memory:
Quick Boot Quick Boot
Network Boot Network Boot
F12 Boot Menu F12 Boot Menu
D2D Recovery D2D Recovery
SATA Mode SATA Mode
F1 Help
ESC Exit
NOTE: The screen above is for your reference only. Actual values may differ.
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter
System Time Sets the system time. The hours are displayed with 24-
hour format.
System Date Sets the system date.
Total Memory This field reports the memory size of the system.
Memory size is fixed to 2048 MB.
Video Memory Shows the video memory size. VGA Memory size=8 MB
Quick Boot Allows startup to skip certain tests while booting,
decreasing the time needed to boot the system.
Network Boot Enables, disables the system boot from LAN (remote
server).
F12 Boot Menu Enables, disables Boot Menu during POST.
D2D Recovery Enables, disables D2D Recovery function. The function
allows the user to create a hidden partition on hard disc
drive to store operation system and restore the system
to factory defaults.
SATA Mode Control the mode in which the SATA controller should
operate.
Chapter 2
All manuals and user guides at all-guides.com
InsydeH20 Setup Utility
Security Boot Exit
[15:10:59] [15:10:59]
[03/09/2009] [03/09/2009]
2048 MB 2048 MB
[8 MB] [8 MB]
[Enabled] [Enabled]
[Enabled] [Enabled]
[Enabled] [Enabled]
[Enabled] [Enabled]
[IDE Mode] [IDE Mode]
Select Item Change Values
F5/F6
Select Menu Enter Select
Description
Item Specific Help
This is the help for the
hour field. Valid range
is from 0 to 23.
INCREASE/REDUCE: F5/F6
F9 Setup Default
SubMenu F10 Save and Exit
Format/Option
Format: HH:MM:SS
(hour:minute:second)
Format MM/DD/YYYY
(month/day/year)
N/A
N/A
Option: Enabled or Disabled
Option: Enabled or Disabled
Option: Enabled or Enabled
Option: Enabled or Disabled
Option: AHCI or IDE
Rev. 3.5
23