Advertisement
Quick Links
3 Position
BATTING TEE TO GO®
ITEM NO. 1957
Phase 4
Parts List:
(B) Lower Tube (1pc)
(A) Base (1pc)
(D) Storage Straps (2pcs)
Replacement Part #1958-R1
®
(C) Upper Tube (1pc)
Replacement Part #1958Z3
ASSEMBLY INSTRUCTIONS
Step (1) Insert Lower Tube (B) into desired hole of
Base (A).
Step (2) Insert Upper Tube (C) into Lower Tube (B)
and adjust to desired height.
*For Easy transportation, lower Tube (C) into Tube (B) and
connect to Base (A) with self-stick straps around Tube (B).
FIGURE 1:
(A)
Place tube into self-stick
straps for easy transportation
Major League Baseball trademarks and copyrights are used with
permission of Major League Baseball Properties, Inc. Visit MLB.com
(C)
(B)
Franklin Sports Inc.
Stoughton, MA 02072
Made in China
For Replacement Parts Call:
1-781-341-5178 or 1-800-225-8649
OR visit www.franklinsports.com
Advertisement
Related Manuals for Franklin BATTING TEE TO GO
Summary of Contents for Franklin BATTING TEE TO GO
- Page 1 *For Easy transportation, lower Tube (C) into Tube (B) and ® connect to Base (A) with self-stick straps around Tube (B). 3 Position FIGURE 1: BATTING TEE TO GO® ITEM NO. 1957 Phase 4 Parts List: (C) Upper Tube (1pc)
- Page 2 The Swing: Delivery: Figure 4 shows the proper “delivery” and swing plane. The correct swing is made up of four components – Address, Address: ® Establishing the Strike-Zone: To learn correct batting technique, establishing and understanding the strike-zone is paramount. Figure 1 shows that the ball must be pitched between the left and right side of home plate and pass between your shoulders and knees.