Initial Setup Tx - Ricoh 185 Operating Instructions Manual

Facsimile User Tools

INITIAL SETUP TX

When you turn on the machine or re-
turn to Copy mode, the machine re-
turns to the home settings. You can
change these home settings so that
the machine starts with your most fre-
quently used features selected.
This procedure can be used to change
the home settings for the transmis-
sion mode
Transmission), scanning conditions
(Resolution, Original Type, Image
Density, and Auto Image Density)
and Auto Reset.
Note
You can also choose whether the
machine returns to the home set-
tings after each communication. ⇒
P.184 "Changing the User Parame-
ters"
A
7
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
C
Enter the number of the "Fax".
144
(Memory/Immediate
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the function number for
"Initial Setup TX" using the num-
ber keys.
The "Initial Setup TX" menu is
shown on the display.
E
Enter a function number using
the number keys.
Note
If you make a mistake, press
Cancel and enter the correct
number.
F
Select the mode you want to
change using the 0 0 0 0 or 1 1 1 1 keys
then press [OK].