Advertisement
Open the mounting arm
Place the Brio 300 on top of your monitor and ensure that the front tab of the mount is snug against the front of your screen.
Move the mounting arm towards the back of your screen so that it fits the width of the monitor Please note that you may need to adjust the angle of the "foot hinge" to fit your monitor's shape.
Adjust the angle of the Brio 300 by tilting it forwards or backwards
Plug the attached USB-C connector into the corresponding port on your computer If possible, we recommend plugging the Brio 300 directly into your computer and not through a USB hub.
Open the privacy shutter by gently pushing it from the left or right direction of the device; the cover will snap into its "off" position above the camera.
Logi Tune helps boost your webcam performance with periodic software and firmware updates It is recommended to update your webcam and take advantage of the great features of Brio 300 To do so, download Logi Tune from www.logitech.com/tune
Webcam:
Height x Width x Depth: 2.58 in (65.63 mm) x 2.09 in (53.1 mm) x 1.78 in (45 mm), incl. mount clip
Product weight: 2.63 oz (74.6 g), incl. mount clip & cable
Attached Cable length: 1.5 m (5 ft)
www.logitech.com/support/Brio300
© 2023 Logitech Logitech, Logi and the Logitech logo are trademarks or registered trademarks of Logitech Europe S.A. and/or its affiliates in the US and other countries USB-C and all other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual Information contained herein is subject to change without notice.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Logitech BRIO 300 - Full HD Webcam with Privacy Cover Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the BRIO 300 that isn't answered in the manual? Leave your question here.