Advertisement
A Tapo Hub is required. Make sure your Tapo Hub is successfully added via the Tapo app.
Remove the battery insulation tab to power up your sensor. The LED should blink.
Note: If the LED is not blinking, refer to the reverse side for reset instructions.
Open the Tapo app and tap the button. Select Sensors and then your model. Follow the app instructions to complete setup.
Take your sensor to the preferred location and wave your hand in front of the sensor to test it. The Tapo app should show if the sensor is triggered.
Option 1: Magnetically attach to metallic objects
OR
Option 2: Stick to a clean wall with included adhesive
OR
Option 3: Place it on a shelf or table
The sensor should be aligned with the detection area and placed as close as possible to the edge of a table or cabinet. The installation height should not be higher than 2 meters.
The Motion Sensor detects movement in a certain area and triggers different actions in response. This makes your home safer and smarter.
Option 1: With a Shim
OR
Option 2: By Hand
Use a pin to press and hold the Reset button for 5 seconds until the front LED starts blinking.
Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Do not use the device where wireless devices are not allowed.
Please read and follow the above safety information when operating the device.
We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
Do not ingest battery, Chemical Burn Hazard
Need some help?
Visit www.tapo.com/support/ for technical support, FAQs, warranty & more
Setup Video
Visit https://www.tp-link.com/support/setup-video/#smart-sensors
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download TP-Link Tapo T100 - Smart Motion Sensor Quick Start Guide
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Tapo T100 that isn't answered in the manual? Leave your question here.