TP-Link HS100 - Wi-Fi Smart Plug Manual

Introduction

Product Overview

What This Product Does

The Wi-Fi Smart Plugs make it easy to control your lights or household electronic devices anywhere in the world with the TP-Link Kasa app on your smartphones or tablets.

Schedule and Away Mode

With the Kasa's Schedule and Away Mode, you can automate your lights or plugged-in appliances to turn on and off according to specific schedules, to simulate occupancy when you're away from home. In addition, the countdown timer enhances safety by automatically switching off the running household appliances after a preset time.

Compatible with Amazon Echo

You can pair the Smart Plugs with Amazon Echo for voice control.

Compatible with Android, iOS

The free Kasa app lets you run them from any Android (5.0 and higher) or iOS (iOS 8 and higher) smartphone.

Energy Conservation (for HS110 only)

You can efficiently conserve energy and save money while using the Smart Plugs to control your space heaters and fans. The Smart Plug tracks your device's power consumption in real-time, and has weekly and monthly summaries.

Main Features

• Control devices connected to the Smart Plug wherever you have Internet using the free Kasa app on yoursmartphone.
• Schedule the Smart Plug to automatically power electronics on and off as needed, like setting lights to come on at dusk or turn off at sunrise.
• Analyze your plugged-in device's real-time and historical power consumption. (for HS110 only)
• Turns your devices on and off at different times to give the appearance that someone is home.
• Amazon Echo (sold separately) lets you control devices connected to the Smart Plugs just using your voice.

Panel Layout

* Image may differ from actual product due to different regional power specifications. Here we use the U.S. version as an example.

Itemes	Status	Description
(Settings Button)	/	Press this button for 5 seconds or until the Wi-Fi LED blinks amber and green to initiate the app-config process. Press and hold for 10 seconds or until the Wi-Fi LED blinks amber rapidly to factory reset.
(Wi-Fi LED)	Blink	Amber and green: App configuring process. Green: Connecting to the network. Amber: Factory resetting.
	On	Green: Network connection established. Amber: Rebooting. Red: No network connection.
(Power LED)	On Off	The Smart Plug is switched on. The Smart Plug is switched off.
USB Port (HS110 Only)	/	Charge your USB-powered electronic devices. Maximum output current: 1000mA (1A).

Supported Load Types:

Coffee Maker: 800 W
Desk Lamp: 235.2 W
LCD: 270 W
Heater: 1500 W
Humidifier: 260 W
Iron: 1500 W
Toaster: 850 W
Tower Fan: 50 W

Quick Start

1. Download Kasa for Mobile from the App Store or Google Play.
   
   
   OR scan QR code
   
2. Connect your mobile device to a 2.4GHz Wi-Fi network.
   Note: The Smart Plug only supports 2.4GHz networks.
   
3. Launch Kasa and follow the app instructions to connect the Smart Plug to your network.

Troubleshooting

Frequently Asked Questions

1. What devices can I control with the Smart Plug? You can control lights, electronics and small appliances such as humidifiers, air purifiers, portable heaters and fans.
2. What should I do when I can't control the connected device?
   • Check that the connected device is switched to ON.
   • Make sure your mobile device and the Smart Plug are on the same Wi-Fi network.
   • Enable Remote Control to control the connected device from outside your home.
3. What should I do when the Wi-Fi LED is lit red?
   A red LED light indicates no network connection.

• Check your network connectivity.
• Relocate the Smart Plug. Avoid placing the Smart Plug near potential sources of radio signal interference.
• Repeat the app configuring process.
• Factory reset the Smart Plug and try to add it again.

4. How do I pair the Smart Plug with Amazon Echo?
   Visit www.tp-link.com/en/faq-944.html or within the Kasa Help section for pairing instructions.

Support

• Specifications can be found on the product page at www.tp-link.com
• Our Technical Support and troubleshooting information can be found at www.tp-link.com/support.