TP-Link tapo c520ws - Outdoor Pan/Tilt Security Wi-Fi Camera Quick Start Guide

*Images may differ from your actual product.

Set Up Your Camera

STEP 1 DOWNLOAD APP

Get the Tapo app from the App Store or Google Play.

STEP 2 POWER UP

Plug in the adapter to power up your camera.

STEP 3 SET UP

Tap the button in the app and select your model. Follow the app instructions to complete setup.

Mount Your Camera

The camera is not waterproof when set on a table or shelf.
Mount the camera via Option 1 or 2 when installing outdoors.

Option 1: Wall Mount or Overhang Mount

1. Drill Holes
   Stick the mounting template to the desired mounting place. Drill four screw holes (Φ=6mm) according to the template.
   
2. Mount Camera Bracket
   Route the power cord through the opening of the camera bracket. Insert four mounting anchors into the holes and use the mounting screws to affix the bracket over the anchors.
   
3. Install Camera
   Install the camera on the bracket. Use two bracket screws to affix the bracket and the camera.
   
4. Connect to Power
   Connect the camera to a power outlet using the provided power adapter. Install the waterproof seal for the power connectors.
   

Option 2: Pole Mount

1. Mount Camera Bracket
   Route the power cord through the opening of the camera bracket. Mount the camera on the pole using two pole-mounting loops* (loop width ≤ 12mm).
2. Install Camera
   Install the camera on the bracket. Use two bracket screws to affix the bracket and the camera.
   
3. Connect to Power
   Connect the camera to a power outlet using the provided power adapter. Install the waterproof seal for the power connectors.
   

Install Waterproof Cable Attachments

Install the waterproof cable attachments for the network interface. Make sure each part is securely attached and the waterproof rings are flush to keep out water.

The Ethernet port connects to a network device

1. Route the network cable through the following components in order: fix nut, waterproof ring, and then the waterproof jacket.
2. Insert the waterproof ring into the waterproof jacket.
3. Fix the O-ring to the network interface of the camera and connect the network cables.
4. Attach the network interface with the waterproof jacket, then twist to lock. Rotate the fix nut to secure it to the waterproof jacket.

The Ethernet port does not connect to a network device

1. Insert the waterproof plug into the waterproof ring, then insert them into the waterproof jacket.
2. Attach the network interface with the waterproof jacket, then twist to lock. Rotate the fix nut to secure it to the waterproof jacket.

Appearance

1. Lens
2. White Light LEDs
3. IR LEDs
4. System LED
5. Microphone
6. Reset
   Loosen the screws. While the camera is powered on, use a pin to press and hold the Reset button for at least 5 seconds until the System LED blinks red. The camera will reset and reboot.
7. microSD Card Slot
   Loosen the screws and insert a microSD card*. Initialize it on the Tapo app for local recording.
   *microSD card not included
8. Speaker
9. Ethernet Port
   Used to connect to a network device
10. DC Power Connector
    Used to connect to a 9V DC power adapter

System LED Indication

For technical support, the user guide, and more information, please visit www.tapo.com/support/

Safety Information

• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be easily accessible.
• Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don't hesitate to contact us.
• Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.
• Do not disassemble, repair or modify the product.
• Do not use the product if the casing has been broken. Danger of electric shock.
• Never touch the product with wet hands.
• Do not place near automatically controlled devices such as fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.
• Observe restrictions on using wireless products in fuel depots, chemical plants or when blasting operations are in progress.
• Do not use liquid to clean the product. Only use a dry cloth.
• Never put metal objects inside the product. If a metal object enters the product turn off the circuit breaker and contact an authorised electrician.
• This product is not intended to be used when providing medical care. Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids to determine if they are adequately shielded from external RF (radio frequency) energy.
• Do not use this product in health care facilities. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
• Do not place heavy objects on top of the product.
• When you leave the product unused for a long time unplug the product from the power outlet.
• This product may interfere with other electronic products such as TV, radios, personal computers, phones or other wireless devices.
• Adapter should be used indoors where the ambient temperature is lower than or equal to 40ºC.
• Operating Temperature: -30 ºC ~ 60 ºC (-22°F ~ 140°F )

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tapo.com/support/ce
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK declaration of conformity may be found at https://www.tapo.com/support/ukca/