Anker 575 - 5 Series USB-C Hub Manual

Also See for 5 Series:

Table of Contents

At a Glance

Item	Description
1. USB-C Port (Connects to Host)	Connects to a laptop.
2. Power Indicator	Turns white when connected to a laptop. Flashes white once every second when upgrading firmware.
3. USB-C 3.2 Gen 2 Port	10 Gbps data transfer
4. USB-A 3.2 Gen 2 Port	10 Gbps data transfer
5. Audio In / Out	Connect to earphones or other devices with a 3.5 mm AUX connector.
6. SD / microSD Card Slot	UHS-I, 104 MB/s The card slot lets you insert an SD or microSD card to copy files to and from your device.
7. PD-IN	Connect to a Power Delivery charger to charge a connected laptop or tablet. Supports up to 100W input, and 85W charging to the laptop.
8. Ethernet Port	Connect to a router or modem at 10/100/1000 Mbps.
9. DisplayPort 1.4	Up to 4K@60Hz output to a single display when connected to a laptop.
10. HDMI 2.0 Port	Up to 4K@60Hz output to a single display when connected to a laptop.

Data Speed	Up to 10Gbps
HDMI	Single Display: Up to 4K@60Hz Dual Display: Up to 4K@30Hz Triple Display: Up to 2K@60Hz
Supported Systems	Windows 10/11, macOS 12 or later

Tips: The table above shows the maximum supported resolutions. Actual resolution varies based on the specifications of the host device.

For tutorial videos, FAQs, manuals, and more information, please visit:https://support.anker.com Or scan the QR code below:

Do you have a question about the 5 Series that isn't answered in the manual? Leave your question here.

Thank you! Your question has been received!

Save Article as PDF