Page 1
Precision Linear Actuators ECT Series Manual DW110666GB-1806 EDITION 2...
Page 2
All rights reserved. No part of this work may be reproduced in any form (by printing, photocopying, microfilm or any other method) or processed, copied or distributed by electronic means without the written permission of Thomson Industries Inc. DW110666GB-1806 EDITION 2...
Page 3
ECT MANUAL FEBRUARY 2018 THOMSON Content This manual is a compilation of manuals and documents that cover the installation, service and maintenance of the individual components that are used to build the different ECT Precision Linear Actuators. The page numbering in the individual manuals are kept, the below page numbers are the page number in this pdf - document where the start of the manual in question can be found.
Page 4
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1805 – EDITION 7 www.thomsonlinear.com...
Page 5
All rights reserved. No part of this work may be reproduced in any form (by printing, photocopying, microfilm or any other method) or processed, copied or distributed by electronic means without the written permission of Thomson. Printed in Sweden. DW110353GB-1805 EDITION 7...
T-SERIES PRECISION LINEAR ACTUATORS JANUARY 2018 THOMSON Table of Contents 1. Type designation system ..................4 2. Mounting instructions ...................5 Installation ..........................5 Connection of load ........................6 Motor flange ..........................6 Feet mounting kit ........................7 Trunnion mounting kits ......................7 Mounting of worm gear type BS40 / BS50 ................
T-SERIES PRECISION LINEAR ACTUATORS JANUARY 2018 THOMSON 1. Type designation system Table 1: Type designation system Figure 1: definition of ordering length L DW110353GB-1805 EDITION 7 INSTALLATION MANUAL...
T-SERIES PRECISION LINEAR ACTUATORS JANUARY 2018 THOMSON 2. Installation 2.1 Mounting instructions Figure 2: mounting instructions 1. The actuators have threaded holes in the front and rear housings and T-slots along the profile that can be used for mounting. Be sure to mount the actuator so that the lubrication hole is accessible.
T-SERIES PRECISION LINEAR ACTUATORS JANUARY 2018 THOMSON 2.2 Connection of load Figure 3: connection of load 2.3 Motor flange Figure 4: motor flanges DW110353GB-1805 EDITION 7 INSTALLATION MANUAL...
T-SERIES PRECISION LINEAR ACTUATORS JANUARY 2018 THOMSON 2.6 Mounting of worm gear type BS40 / BS50 Figure 7: flange for worm gear type BS40 / BS50 To be able to mount a worm gear (a) of type BS40 (for T90 only) or BS50 (for T130 only) an intermediate flange (b) must be used.
T-SERIES PRECISION LINEAR ACTUATORS JANUARY 2018 THOMSON 3. Service and maintenance General maintenance instructions • The customer can perform the service and maintenance described in this manual. Other service ought to be performed by authorised personnel / service workshop. •...
Page 13
T-SERIES PRECISION LINEAR ACTUATORS JANUARY 2018 THOMSON 3.2 Lubrication of the ball screw Figure 9: lubrication of the ball screw 1. The ball screw is lubricated every 600 hours of operation or every 6:th month depending on whichever comes first.
Page 15
203A West Rock Road Thomson Office 9, The Barns Radford, VA 24141, USA Phone: 1-540-633-3549 Caddsdown Business Park Bideford, Devon, EX39 3BT Fax: 1-540-633-0294 E-mail: thomson@thomsonlinear.com Phone: +44 (0) 1271 334 500 Literature: literature.thomsonlinear.com E-mail: sales.uk@thomsonlinear.com Germany ASIA Thomson Asia Pacific Nürtinger Straße 70...
Page 75
Beltgear type BGM09, BGM41 and BGM81 Installation Manual Edition: 1 DW110500gb-0450...
Page 76
THOMSON DECEMBER 2004 Beltgear type BGM09, BGM41 and BGM81 Table of Contents 1. Mounting instructions...................3 Position of type designation plate and mounting of the belt gear plate........3 Mounting of the motor coupling ....................3 Mounting of the coupling to the unit..................4 Mounting of the belt ........................
Beltgear type BGM09, BGM41 and BGM81 DECEMBER 2004 THOMSON 1. Mounting instructions 1.1 Position of type designation plate and mounting of the belt gear plate Figure 1: designation plate and belt plate The designation of the belt gear can be found on the type designation plate (a). Measure the diameter of the unit shaft before mounting.
THOMSON DECEMBER 2004 Beltgear type BGM09, BGM41 and BGM81 1.3 Mounting of the coupling to the unit Figure 3: coupling to the unit Insert the coupling in the belt wheel and put the two on the shaft/sleeve of the unit. The supplied coupling can be one of two types (f1 or f2).
Beltgear type BGM09, BGM41 and BGM81 DECEMBER 2004 THOMSON 1.5 Mounting of the cover Figure 5: mounting of the cover Mount the cover (i) and the sealing using the six screws. If the belt gear comes with a clevis (j), mount the clevis and the cover using the four distance sleeves, the four long and the two short screws.
THOMSON DECEMBER 2004 Beltgear type BGM09, BGM41 and BGM81 2. Tables 2.1 Tightening torque for screws 2.2 Dimension L Screw size Tightening torque [Nm] Type of gear L [mm] BGM09 BGM41 13,5 BGM81 Table 2: dimension L Table 1: tightening torque for screws 2.3 Tightening torque for motor shaft couplings...
Beltgear type BGM09, BGM41 and BGM81 DECEMBER 2004 THOMSON 3. Technical data 3.1 Technical data Belt gear model BGM09 BGM41 BGM81 Weight [kg] 12,1 Weight of clevis option [kg] Max. input speed [rpm] 5000 5000 5000 Protection class IP65 IP65...
Page 82
Beltgear type BGM09, BGM41 and BGM81 DECEMBER 2004 THOMSON Sales and Service Danaher Motion products are available worldwide through an extensive authorised Distributor network. These distributors offer literature, technical assistance and a wide range of models off the shelf for fastest possible delivery.
Page 84
www.LinearActuators.com Installation manual for magnetic sensors...
Page 85
Magnetic Sensor Magnetic Sensor N.O. (normally open) N.C. (normally closed) P/n. D535 070 P/n. D535 071 Connection diagram Connection diagram D535 070 D535 071 Black Black Blue Blue Mechanical dimensions 19,8 3000 D535 070 and D535 071 63,5 M3 × 0,5 (2 ×) 26,2 Mechanical data Housing material...