Fan - HP 250 G7 Maintenance And Service Manual

Fan

Table 6-12 Spare part description and number
Description
Fan for use in models with discrete graphics
Fan for use in models with UMA graphics
Before removing the fan, follow these steps:
1. Prepare the computer for disassembly
2. Remove the optical drive (see
3. Remove the bottom cover (see
4. Remove the battery (see
Remove the fan:
1. Disconnect the fan cable from the system board (1).
2. Remove the Phillips M2.5 × 6.0 screw (2) that secures the fan to the computer.
3. Lift the fan from the computer (3).
Reverse this procedure to install the fan.
(Preparation for disassembly on page
Optical drive on page
Bottom cover on page
Battery on page 34).
29).
32).
Component replacement procedures
Spare part number
L20473-001
L20474-001
28).
49