Usb/Card Reader Board - HP 250 G7 Maintenance And Service Manual

USB/card reader board

Table 6-9 Spare part description and number
Description
USB/card reader board
USB/card reader board cable
Before removing the USB/card reader board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the optical drive (see
3. Remove the bottom cover (see
4. Remove the battery (see
Remove the USB/card reader board:
1. Disconnect the cable from the ZIF connector on the USB board (1).
2. Remove the Phillips M2.0 × 3.0 screw (2), and then remove the board from the computer (3).
Reverse this procedure to replace the USB/card reader board.
(Preparation for disassembly on page
Optical drive on page
Bottom cover on page
Battery on page 34).
29).
32).
Component replacement procedures
Spare part number
L20448-001
L20452-001
28).
45