For simplicity, we will take POE160S for example in this Guide.
Connection
Powered Device (PD)
IP Camera
Note:
1. The PoE Injector supplies steady power and data connectivity to a powered device such as PoE IP Camera, PoE AP and PoE IP Phone through an Ethernet cable.
2. For POE170S/POE380S, plug the product into the wall outlets with earthing connection through the power supply cord.
Page 1
LED Explanation For POE160S/POE260S Off: Power off Steady Yellow: Power on, no PoE power supply Installation Guide Steady Green: Power on, normal PoE power supply Flashing Green: Abnormal PoE power supply PoE Injector For POE170S/POE380S Power on Off: Power off Normal PoE power supply Off: No powered device connected...
Page 2
Storage Humidity 5% to 90% RH non-condensing Safety Information TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, Keep the device away from water, fire, humidity or hot environments.
Page 3
Protecti ve earth We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.