Power Connector Cable - HP Victus Maintenance And Service Manual

4. Remove the fan assembly from the computer (4).
To install the fan assembly, reverse this procedure.

Power connector cable

To remove the power connector cable, use this procedure and illustration.
Table 6-6 Power connector cable description and part number
Description
Power connector cable
Before removing the power connector cable, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the power connector cable:
1. Remove the Phillips M2.0 × 4.0 screws (1) that secures the bracket, and then remove the bracket (2).
2. Disconnect the cable from the system board (3).
Preparation for disassembly on page
Bottom cover on page 37).
37).
Battery on page 39).
Power connector cable
Spare part number
N13314-001
47