HP Compaq Presario CQ58 Maintenance And Service Manual page 76

Hide thumbs Also See for Compaq Presario CQ58:

Table of Contents

Remove the display assembly (2).

If it is necessary to replace the display bezel or any of the display assembly subcomponents:

Remove the two display bezel screw covers (1) and the two Phillips PM2.5×5.5 screws (2)

that secure the display bezel to the display assembly. The display bezel screw covers are

available in the Rubber Kit, spare part number 686276-001.

Flex the inside edges of the bottom edge (3), the left and right sides (4), and the

top edge (5) of the display bezel until the bezel disengages from the display enclosure.

Chapter 4 Removal and replacement procedures

Table of Contents