Display Assembly - HP Compaq Presario CQ58 Maintenance And Service Manual

Display assembly

NOTE: The display assembly is spared at the subcomponent level only. For more display assembly
spare part information, see the individual removal subsections.
Before removing the display assembly, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
5. Disconnect the wireless antenna cables from the WLAN module (see
on page
6. Remove the following components:
a. Keyboard (see
b. Hard drive (see
c. Top cover (see
Remove the display assembly:
1. Disconnect the display panel cable (1) from the system board.
66 Chapter 4 Removal and replacement procedures
Battery on page
35).
Keyboard on page
Hard drive on page
Top cover on page
34).
38)
44)
48)
Memory module