Fan/Heat Sink Assembly - HP Compaq Presario CQ58 Maintenance And Service Manual

Hide thumbs Also See for Compaq Presario CQ58:

Table of Contents

Remove the system board (3) by sliding it up and to the right at an angle.

Reverse this procedure to install the system board.

Fan/heat sink assembly

Description

Fan/heat assembly (includes replacement thermal material)

Before removing the fan/heat sink assembly, follow these steps:

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

Disconnect the power from the computer by unplugging the power cord from the computer.

Disconnect all external devices from the computer.

Remove the battery (see

Memory module/wireless module compartment cover (see

Keyboard (see

Hard drive (see

Battery on page

34), and then remove the following components:

Keyboard on page

38)

Hard drive on page

44)

Spare part number

688306-001

Memory module on page

Component replacement procedures

35)

Table of Contents