6.
Separate the display assembly (2) from the top cover.
7.
To remove the display bezel:
a.
Flex the inside of the left and right sides (1) and the top (2) of the bezel to release the bezel from
the display back cover.
b.
Starting on the side of the bottom of the bezel, insert a tool (3) and pull it along the bottom to
release the bezel.
c.
Remove the display bezel (4).
Bezel protective Mylar is available in the Plastic Kit as spare part number N06911-001.
Bezel adhesive is available in the LCD Support Kit as spare part number M27375-001.
The bezel is available using the following spare part numbers:
●
N56094-001—Models with a 5 MP + IR camera
Display assembly
61