Card Reader Board - HP ZBook Power G10 Maintenance And Service Manual

2. Detach the RTC battery (2) from the computer. The RTC battery is attached with adhesive.
To install the RTC battery, reverse this procedure.

Card reader board

To remove the card reader board, use this procedure and illustration.
Table 5-7 Card reader board description and part number
Description
Card reader board
Card reader board cable (included in Cable Kit)
Card reader insert (included in Plastic Kit)
Support brackets (available in Bracket Kit)
Before removing the card reader board, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the card reader board:
1. Remove the two Phillips M2.0 × 5.0 screws (1) that secure the battery support bracket to the
computer.
46 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page 39).
37).
Spare part number
N12914-001
N56092-001
N06911-001
M21855-001
37).