Assembly Instructions - Health O Meter Professional 502KL User Instructions

ASSEMBLY INSTRUCTIONS

Before Assembly
Each 502KL / 502KG eye level digital beam scale is shipped disassembled in one carton.
Carefully inspect the carton for shipping damage before unpacking. If damage is found, contact
your shipper or a Health o meter
Claims must be filed with the shipper as soon as possible after receipt of the package. The
following information details what you will find inside the main carton as you unpack the parts for
assembly.
To prevent scratching any components, carefully remove each assembly from the carton and
unwrap the packing materials. Set the carton aside for storage. To avoid damaging the scale
parts when unpacking, do not use a box cutter, knife, scissors, or any sharp object to open the
protective inner packaging.
Parts List
Carton
(1) Scale platform
(1) Pillar column (w / display assembly)
(6) AA batteries
(1) User instructions
(4) Column mounting screws (attached to pillar column)
Tools Required
Phillips head screwdriver (not included)
1. Carefully remove the contents
of the carton and place each
part on a flat, level, and dry
surface. Remove the 4
column mounting screws and
washers from the bottom of
the pillar column and set aside
for assembly step 4.
2. Remove the black wheel
cover from the packaging.
Read the "Attention" label
then remove it from the
bracket. Place the cover back
onto the platform.
®
Professional representative immediately at 1-800-815-6615.
6
Screws and washers
Pillar
Column