TP-Link W4 Sport User Manual

W4 Sport Bluetooth Headset User Manual
BASIC OPERATIONS
Turning the headset on/off
1. To turn the headset on
Press and hold Button 1 for 3 seconds, the white indicator of the headset will flash 1 second and you will
hear a voice "Power on", then the headset is turned on.
2. To turn the headset off
Press and hold Button 1 for 2 seconds, the white indicator will flash and turn to red, you will hear a voice
"Power off", then the headset is turned off.
3. When you hear a voice "Battery Low", please charge the headset.
Charging
Connect the USB port of the headset with the car charger or computer by USB cable. When charging,
the indicator of the headset will turn white, when full charged, the indicator will turn off.
Pairing
Before using your headset for the first time, you must pair it with your Bluetooth enabled phone.
1. Ensure that the headset is off (see "To turn the headset off" section).And the mobile phone Bluetooth
setting is activated.
2. Press and hold Button 1 for about 5 seconds until the indicator light flashes white all the time and you
will hear a voice "pairing", now the headset is under pairing mode.
3. Set your Bluetooth phone to discover the headset by following your phone's guide. Typically, the steps
involve going to a 'Setup', 'Connect', or 'Bluetooth' menu on your phone and then selecting the option to
discover Bluetooth devices.
4. Your phone will find the "W4" headset and press "W4" on the mobile phone, you will hear a voice
"connected", and then your headset is connected with your mobile phone.
5. If your mobile phone is below version 2.1, then you need to enter password "0000".
IMPORTANT: If the pairing can't be completed within 90 seconds while the pairing mode is activated,
which means the pairing is unsuccessful, please repeat Step 1 to Step 5 to pair the headset with the
mobile phone again.
Pairing Your Headset with Two Mobile Phones (Multipoint connecting)
1