Advertisement
Installation
Wired remote controller installation
Wired remote controller installation
1 . Insert a small flat head screwdriver into the square groove in the bottom of your wired
remote controller, and then pull up the front cover to separate it from the rear cover .
2 . Arrange the communication cable so that they fit in the housing along the edges of the rear cover .
Remove it
5 cm
5 cm (2 inch)
(2 inch)
< When the cable is not concealed >
< When the cable is concealed >
ENGLISH-6
SOL 터치간단유선 유럽향 IM_EN_DB68-08073A-00.indd 6
2018-10-11 오후 3:35:05
Advertisement
