Health O Meter 3423 Manual page 275

ASSEMBLY INSTRUCTIONS (CONTINUED)
8. Position and secure the
connected columns A and B
to scale platform C. Locate
the 4 column mounting screws
previously removed in step 2.
Ensure that washers are
located between the screw
heads and the scale platform
C screw holes. Insert the 4
screws through the bottom of
scale platform C screw holes
and into Column B. Using a
Phillips head screwdriver,
tighten the screws to secure
Column B to the base of
platform C.
9. Height Rod Assembly:
Locate the upper height rod D
and lower height rod E. Align
upper height rod D with lower
height rod E. Snap the locking
tab into place. Ensure locking
tab is securely locked.
P/N UM500KL 500KG Rev 20190408
Notch
274
Back to Home Page
Upper Height Rod D
Locking Tab
Lower Height Rod E