Health O Meter 3423 Manual page 10

ASSEMBLY INSTRUCTIONS (CONTINUED)
8. On the underside of the
platform, feed the wire for the
power adapter port through
the base and plug into the
port. Note: Ensure the wire is
tucked into the slot in the base
as shown.
9. Height Rod Assembly:
Locate the upper height rod D
and lower height rod E. Align
upper height rod D with lower
height rod E. Snap the locking
tab into place. Ensure locking
tab is securely locked.
10. Position the bottom of the fully
assembled height rod into the
height rod opening G at the
top of column A. Press locking
tab F inward to insert the
height rod into the height rod
opening G. The scale is now
assembled and ready to use.
Notch
Height rod E
Locking tab F
Locking tab F
9
Back to Home Page
Upper Height Rod D
Locking Tab
Lower Height Rod E
Height rod
opening G
Column A