Restart The Extender From The Extender Web Interface - NETGEAR EAX20 User Manual

For more information about how to find your extender's IP address, see Find
the Extender's IP address on page 60.
A login page displays.
4. Enter your admin email address and password and click the LOG IN button.
The Status page displays.
5. Enter your admin user name and password and click the LOG IN button.
The Status page displays.
6.
If your browser displays the Menu icon
The extender menu displays.
7. Select Firmware Update.
The Firmware Update page displays.
8. Click the BROWSE button.
9. Locate and select the new firmware file.
The firmware file name ends with a .img or .chk extension.
10. Click the UPLOAD button.
CAUTION: After you click the UPLOAD button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender until it finishes
restarting.
The firmware update starts and the extender restarts. The firmware update process
takes about two minutes.
Restart the extender from the extender web
interface
You can log in to the extender and restart it. When the extender restarts, all computers
and WiFi devices that are connected to its WiFi network are automatically disconnected.
Maintain and monitor the
extender
AX1800 4-Stream WiFi Mesh Extender
55
, click it.
User Manual