Behringer GO VIDEO KIT Quick Start Guide

Features

• Premium microphone kit for high-quality videography on-the-go
• Excellent choice for vlogs, podcasts, interviews, live-streaming, field recordings and more
• Noise-canceling capsule eliminates background noise
• High-resolution 32-bit / 96 kHz audio codec
• Zero-latency direct monitoring headphone output
• Tripod with tilting neck for easy positioning
• Extension for recording selfie videos
• Multi-device compatibility via adjustable smartphone clamp
• USB-A and USB-C connection cables for computer and smartphone
• Customized foam windscreen and durable carry case included

Accessories List

• Tripod with smartphone holder
• USB connection cables
• Zipper case

Basic on-the-go setup

To set up the basic configuration, follow these steps:

1. Gently screw down the smartphone holder onto the tripod's threaded mounting point until secure.
2. Attach microphone clip with the smartphone holder's shoe mount and twist the nut until secure.
3. Adjust the smartphone holder to fit your smartphone by loosening the rear knob. Re-tighten the rear knob to secure the smartphone in place.
4. Insert the microphone body into the microphone clip and place the windscreen over the microphone capsule.
5. Connect the smartphone with the microphone with Type-C cable.

Selfie video setup

When recording selfie videos that require extra height for your smartphone, install the selfie rod by following these setup steps:

1. Gently screw down the selfie rod onto the tripod's threaded mounting point until secure.
2. Gently screw down the smartphone holder onto the selfie rod's threaded mounting point until secure.
3. Complete the rest of the setup as described in Steps (2) – (5) of the Basic on-the-go setup.

Specifications