Advertisement
Once installation is completed, the previously removed casing and front
door can be reassembled.
Hook the fixed casing (2) back onto the screws with stop on the frame
and tighten the fixing screws.
Proceed as follows to assemble the front door (1):
- Lift the door by gripping the metal-sheet plate with your right hand,
also using the front round handle and with your left hand grip the
internal handle (1a).
- Engage the tab (1c) into the provided slot (1e);
- Once the tab is inserted, lock everything in position by tightening
the 3 screws (3).
1e
1g
Fig. 5
1d
1c
1f
1f
N.B.: the vertical position of the door can be adjusted using the slots
(1d).
N.B.: if the front door (1) is not aligned with the frame, a further
adjustment can be made by loosening the screws (1f) and moving the
profile (1g) vertically using the provided slots. Once adjusted, tighten
the screws (1f).
N.B.: the following image is only an example of the various installation
options possible.
3
3
3
13
1a
1
Advertisement
