Pump Anti-Block Function; Three-Way Anti-Block System; System Setpoint Correction Function - Immergas MAGIS HERCULES PRO MINI 6 Instructions And Recommendations

3.14 PUMP ANTI-BLOCK FUNCTION

The indoor unit has a function that starts the pump at least once every 24 hours for the duration of 30 seconds in order to reduce the risk of
the pump becoming blocked due to prolonged inactivity.

3.15 THREE-WAY ANTI-BLOCK SYSTEM

The indoor unit has a function that activates the motorised three-way unit 24 hours after the last time it operated by running a complete
cycle in order to reduce the risk of the three-way blocking due to prolonged inactivity.

3.16 SYSTEM SETPOINT CORRECTION FUNCTION

In the presence of hydraulic disconnections on the system downstream of the appliance distribution circuit, it is possible to activate a
function that makes it possible to correct the request setpoint to the generator to approach the set zone setpoint as much as possible.
The corrections can be made either in central heating / C.H. or in cooling mode.
Activation takes place by setting the parameters
System definition / Max CH adjust
System definition / Max Cool. adjust
with a value > 0°C.
Following a demand, the correction begins after a time equal to
System definition / Activation time
and continue by 1°C each
System definition / Increase time
minutes.
95