Immergas MAGIS HERCULES PRO MINI 6 Instructions And Recommendations page 91

Menu item
Dehumid. in cool.air Dehumidification control in cooled air (0 = zone 2, 1 = zone 1)
Safety therm. Zone 2 Zone 2 safety thermostat
Safety therm. Zone 3 Zone 3 safety thermostat
Enable recirculation (*) DHW recirculation enabling (0= off; 1= on)
Integr.multiplier Do not use
Enab.heat.resistance 2 Do not use
Enab. Expansion Expansion Enabling
Enab. Heat./cool.select. Enabling the heating/cooling selector switch
Parameter 1 Zone 1 flow probe enabling
System-side electrical integration power (value multiplied by a
Parameter 2
factor of 10: 30 corresponds to a 3kW resistance)
Room antifreeze protection setpoint (value multiplied by a
Parameter 3
factor of 10: 40 corresponds to 4°C)
Parameter 4 Boost dehumidification
Temperature threshold below which the DHW integration to
Parameter 5 the heat pump is activated (value multiplied by a factor of 10:
-200 corresponds to -20°C)
Parameter 6 Do not use
Parameter 7 Do not use
Parameter 8 Do not use
Parameter 9 Do not use
Parameter 10 Do not use
(*) It is not possible to activate the recirculation function when using the external probe IU (optional).
Menu / Support / Special parameters
Description Range Default
0-1 0
20-80 45
20-80 45
0-1 0
1-100 10
0-100 0
0-100 0
0-100 0
0-1 0
0-100 30
0-100 0
0-1 0
-1000 1000 -200
0-100 0
0-100 0
0-100 0
0-100 0
0-100 0
Customised
value
91