Immergas MAGIS HERCULES PRO MINI 6 Instructions And Recommendations page 88

Menu item
Powers
Timers
Pump
Menu item
HP Type Setting the indoor unit model
HP Model Setting the connected outdoor unit. Do not use the item "No".
Enable the Disabling function of the heat pump. By selecting
Disable HP "Reduct.", it is possible to reduce the heat pump performance to
the power set in the parameter "Power in reduced".
Power in reduced Power percentage in reduction mode.
Menu item
Anti-cycle time Not used
Ramp time Not used
In the case of both the room thermostat and the Zone Panel, the
Req.delay time TA request to the appliance occurs with a delay set with respect to
the request to the zones.
Prec.end wait time Not used
Menu item
Enable the pump operation with speed set "Max Sp." or the
Pump mode modulating mode with tracking of the modulating tempera-
ture ("Modul.") differential.
Min pump speed Value of minimum speed used in modulating operation
Max pump speed Heat pump circulator speed
Pump T Delta Not used
Automatic vent Not used
88
Menu / Support / Heat pump
Menu / Support / Heat pump / Powers
Description
Menu / Support / Heat pump / Timers
Description
Menu / Support / Heat pump / Pump
Description
Description
Range Default
MHP / MHP
MHP Mini
Mini
No / 6 / 9
No / Yes /
No
Reduct.
50 - 100 % 75 %
Range Default
0-840 s 180
0-840 s
0-600 s
0-100 s
Range Default
Max Sp. / Modul. Max Sp.
20 – 100 % 100
20 – 100 % 100
2 – 10
No / Yes No
Customised
value
6
Customised
value
0
0
0
Customised
value
5