Immergas MAGIS HERCULES PRO MINI 6 Instructions And Recommendations page 84

Menu item
Enablings
Thermoreg. CH
Thermoreg. Cool.
Menu item
Mode Establishes the zone 3 operating mode
Enables the operation of a remote device.
- No = No remote control installed
Enable remote contr.
- Panel = Remote zone control
- Probe = Temperature and humidity probe
Room. probe modul. Enable modulation with room probe
Enable room thermostat Enable operation of a room thermostat to check the zone
In the presence of a remote device, calculation of the dew point.
Enable dew point The calculation is particularly needed in case of radiant panel
systems.
Enable humidistat Enables the operation of a humidistat
Enable dehumidifiers Enables the operation of a dehumidifier
Maximum flow temperature acceptable for the dehumidifier,
Max dehum. temp.
beyond which it is kept switched off.
Dehum. alarm set Maximum flow set calculated, acceptable by the dehumidifier.
Ext. probe modul. Thermoregulation with external probe
(*) if present.
84
Zones / Zone 3 (*) / Configuration
Central heating thermoregulation setting sub-menu
Cooling thermoregulation setting sub-menu
Zones / Zone 3 (*) / Configuration / Enablings
Description
Description
Range Default
CH
Cool. Cool+CH
Cool+CH
CH
Cool. No
CL+CH
Yes / No No
Yes / No Yes
Yes / No Yes
No / Yes No
Yes / No No
15 - 50 25
15 - 50 25
No / Yes No
Customised
value