Installing The Indoor Unit; Description Of The Product; Installation Warnings - Immergas MAGIS HERCULES PRO MINI 6 Instructions And Recommendations

1

INSTALLING THE INDOOR UNIT

1.1

DESCRIPTION OF THE PRODUCT.

Magis Hercules Pro Mini 6-9 is a heat pump consisting of:
- UI MHPM indoor unit (hereinafter called, indoor unit or UI MHPM).
- Audax Pro 6-9 V2 outdoor unit (hereinafter referred to as outdoor unit or Audax Pro 6-9 V2).
Magis Hercules Pro Mini 6-9 is perfectly operational only if the two units are correctly powered and interconnected.
The UI MHPM indoor unit was designed solely for floor installation for heating and air conditioning and to produce domestic hot water
for domestic use and similar purposes.
For normal operation is must be paired with one of the following outdoor units:
- Audax Pro 6 V2;
- Audax Pro 9 V2.
Accordingly, it is necessary to comply with all of the rules regarding safety and the use of both appliances.
1.2

INSTALLATION WARNINGS

Operators who install and service the appliance must wear the personal protective equipment
required by applicable law.
The place of installation of the appliance and relative Immergas accessories must have suitable features (technical and structur-
al), such as to allow for (always in safe, efficient and comfortable conditions):
- installation (according to the provisions of technical legislation and technical regulations);
- maintenance operations (including scheduled, periodic, routine and special maintenance);
- removal (to outdoors in the place for loading and transporting the appliances and components) as well as the eventual re-
placement of those with appliances and/or equivalent components.
Installation must be carried out according to regulation standards, current legislation and in compliance with local technical
regulations and the required technical procedures.
The appliance operates with R32 refrigerant gas.
This gas is ODOURLESS.
Pay the utmost attention
Strictly follow the instruction handbook of the outdoor unit before installation and any type
of operation on the chiller line.
R32 refrigerant gas belongs to the low flammability refrigerant category: class A2L according
to standard ISO 817. It guarantees high performance with low environmental impact. The new
gas reduces the potential environmental impact by one third compared to R410A, having less
effect on global warning (GWP 675).
The manufacturer declines all liability in the event of damage caused by appliances removed from other systems or for any
non-conformities with such equipment.
Only a professionally enabled company is authorised to install Immergas appliances.
7