Operating Mode - Immergas MAGIS HERCULES PRO MINI 6 Instructions And Recommendations

2.5 OPERATING MODE

The indoor unit can work in the following modes:
– OFF;
– STAND-BY ( );
– SUMMER ( );
– SUMMER WITH COOLING (
– WINTER ( ).
If the indoor unit is at "OFF", press the button "
Then press the "MODE" button in sequence to set the system to stand-by
position.
• "OFF" mode
By pressing this button, the display will show "Off" and the system will be off. In this mode, the safety functions are not guaranteed and
the remote devices are disconnected (Fig.29).
In these conditions the indoor unit is considered still live even if there are no functions active.
• "Stand-by" Mode
Press the "MODE" button in succession until the
In this mode, the system is able to ensure protection functions only, such as: antifreeze function, antiblock function and any anomaly
signals (Fig. 29).
In these conditions the system must still be considered powered.
• Summer
Press the "MODE" button in succession until the
In this mode the system allows the production of domestic hot water and ensures protection (Fig. 29).
• Summer with cooling
Press the "MODE" button in succession until the "
In this mode the system allows the production of domestic hot water, room cooling and dehumidification and ensures protection (Fig.
29).
• Winter
Press the "MODE" button in succession until the
In this mode the system allows the production of domestic hot water and room central heating / C.H. and ensures protection (Fig. 29).
List of functions
The following functions can be set on the internal unit:
– DHW (Domestic hot water);
– Central heating / C.H.;
– Cooling;
– Dehumidify.
36
);
" to activate it. If this is not the case, go to the next point.
symbol appears.
symbol appears.
" symbol appears.
symbol appears.
, summer , summer with cooling , winter