Immergas MAGIS HERCULES PRO MINI 6 Instructions And Recommendations page 34

Once the device has been powered, it goes into the status prior to switch-off. Press the "MODE" button to cyclically select the desired op-
erating mode amongst those available.
The operating mode in use is indicated by its icon at the top of the display (Fig. 29) and is unique for all zones. By pressing any button, the
pushbutton panel lights up for a few seconds; in this way it is activated and ready to receive the subsequent commands. Depending on the
system's configuration, the main screen displays various information regarding the system itself, amongst which:
Symbol
Zone identification icon. This icon reverses its colour during the central heating / C.H./cooling demand. The values below
the zone icon, respectively indicate the temperature and the humidity detected in such zone
Dominus enabled
Zone remote panel presence icon
Thermoregulation enabled on at least one zone
Active holiday program
Connection to temperature and humidity room probes
Active photovoltaic function
Outdoor unit compressor request
Operating
mode
OFF
Below is a description of how to use the control panel, including:
- Enter the menus;
- Moving in the menus;
- Set a menu item;
- Confirming a change;
- Exit without saving.
34
Description DHW
Off Disabled
Summer Enabled
Summer with
Enabled
Cooling
Winter Enabled
Stand-by Disabled
Description and operation
Cooling Central heating
Disabled
Disabled
Enabled
Disabled
Disabled
Protection function
(antifreeze, ...)
Disabled Disabled
Disabled Activated
Disabled Activated
Enabled Activated
Disabled Activated
29