Remote Zone Control (Optional) - Immergas MAGIS HERCULES PRO MINI 6 Instructions And Recommendations

1.8

REMOTE ZONE CONTROL (OPTIONAL)

This remote device is used to adjust the setpoints and to view the main information of the zone where it was configured.
Connect the appliance as shown (Fig. 12).
To correctly configure the device, set the parameters as described below:
Assistance Menu -> Device configuration
Slave address: Address to configure according to the zone where the device is installed
Baud Rate
Parity bit
Stop bits
Heat pump control
20
128
Zone 1 = 41
Zone 2 = 42
Zone 3 = 43
9600
Even
1
NO
37
14