3. Unscrew the screws (g) (Fig. 6).
4. Open the main panel as shown in figure 7.
5. Undo the screws (h) and remove the cover (i) (Fig. 8).
Ensure that the electrical installation corresponds to maximum absorbed power specifications as shown on the indoor unit data name-
plate.
Indoor units are supplied complete with an "X" type power cable (l, Fig. 9) without plug.
The appliance is equipped with two fuses: one 3.15A rapid 230 V~ fuse and one 12 A rapid 230 V~ fuse for integrative resistance.
For the main power supply to the appliance, never use adapters, multiple sockets or extension leads.
If fuses in the main electrical panel are to be replaced, this must also be done by qualified personnel.
14
g
g
h
h
6
i
h
h
7
8