Electrical Connection - Immergas MAGIS HERCULES PRO MINI 6 Instructions And Recommendations

1.7

ELECTRICAL CONNECTION

Indoor unit electrical connection
The internal unit has an IPX5D degree of protection; electrical safety of the appliance is achieved only when it is properly connected to an
efficient earthing system, as specified by current safety standards.
The manufacturer declines any responsibility for damage or physical injury caused by failure to connect the indoor unit to an
efficient earthing system or failure to comply with the IEC reference standards.
Connections are provided to both the control panel (Fig. 12) and the main panel (Fig. 13).
Main panel opening
To open the main panel, simply follow the instructions below:
1. Remove the protection caps (a) and loosen the screws (b) to remove the aesthetic profile (c) (Fig. 4).
2. Open the cover door (f) to make it tilt. Remove the protection caps (d), loosen the two upper front screws and the lower screws (e) to
remove the cover (f) (Fig. 5).
c
b
a
a
b
e
d
e
4
e
f
5
13