Table of Contents
Advertisement
Printing The Page Number
(Page Count)
This feature is called Page Count.
When your fax message is printed at
the other end, page numbers will be
printed on the top of each page. Using
the Page Count feature, you can select
the batch-numbering page numbers.
If you use Page Count, page numbers
will be printed in batch-numbering
format (for example, p1/3, p2/3, and
p3/3 for a three-page message). This
makes it easy for the other party to
see how many pages you sent, and if
any are missing. However, you have
to input the number of pages at the
ten key pad before sending.
If you do not use Page Count, page
numbers will be printed only as a se-
quence (for example, p1, p2, p3). This
makes it difficult for the other party
to tell at a glance whether any pages
are missing (for example, due to a
double feed in your machine's docu-
ment feeder).
Limitation
This feature is available at Immedi-
ate Transmission.
Note
If you do not select Immediate
Transmission, Page Count is auto-
matically switched on, and the
pages are counted automatically.
If the numbering with page count
appears strange, check that the
page count value matches the
number of pages in your docu-
ment.
Optional Features For Transmission
A
Press V until the following dis-
play appears.
SET OPTION
SET PAGES?
B
Press the {Yes} key.
SET OPTION
PAGES:kk
C
Enter {1} and {0} using the ten
key pad.
SET OPTION
PAGES: 10
Note
Example: 10 pages
D
Press the {Yes} key.
Sending Your Identification At
The Top Of Your Message (TTI)
Normally, the TTI programmed in
your machine is printed at the top of
each of the pages you transmit when
they are received at the other end. The
top of the image will be overprinted if
there is no margin at the top of the
transmitted page.
In some cases, you may wish the oth-
er party to receive an unmarked copy
of your original. In this case, you can
switch TTI off.
A
Press V until the following dis-
play appears.
SET OPTION
TTI PRINT?
Y/i
KPAD
3
Y/N
Y/i
23
Advertisement
Table of Contents
