Logitech aK1060 Setup Manual

Thin and light protective keyboard case for samsung galaxy tab s 10.5

Advertisement

Quick Links

TYPE-S
TYPE-S
aK1060 键盘保护套
Thin and light protective keyboard case
适用于 Samsung GALAXY Tab S 10.5
For Samsung GALAXY Tab S 10.5
Setup Guide | 设置指南

Advertisement

Table of Contents
loading

Summary of Contents for Logitech aK1060

  • Page 1 TYPE-S TYPE-S aK1060 键盘保护套 Thin and light protective keyboard case 适用于 Samsung GALAXY Tab S 10.5 For Samsung GALAXY Tab S 10.5 Setup Guide | 设置指南...
  • Page 2 TYPE-S — Thin and light protective keyboard case — For Samsung GALAXY Tab S 10.5 Contents English 简体中文 www.logitech.com/support/type-s...
  • Page 3: Know Your Product

    8. Bluetooth connect button 9. On/off switch 10. Micro-USB charging port 11. Micro-USB charging cable 12. Product documentation TYPE-S TYPE-S aK1060 键盘保护套 Thin and light protective keyboard case 适用于 Samsung GALAXY Tab S 10.5 For Samsung GALAXY Tab S 10.5 ® www.logitech.com/support/type-s 620-006189.002...
  • Page 4 TYPE-S — Thin and light protective keyboard case — For Samsung GALAXY Tab S 10.5 Setting up the keyboard case Getting started 3. Move the keyboard case into the typing position by lifting the back of the 1. Open the keyboard case and push protective case and sliding the hook your Samsung GALAXY Tab S 10.5 forwards until it aligns with the magnet:...
  • Page 5 TYPE-S — Thin and light protective keyboard case — For Samsung GALAXY Tab S 10.5 Connecting your keyboard and tablet 2. Make sure your tablet’s Bluetooth feature is on. The keyboard case links to your tablet via a Bluetooth connection. The first time From a Home screen, touch Apps you use the keyboard case, you must pair...
  • Page 6 TYPE-S — Thin and light protective keyboard case — For Samsung GALAXY Tab S 10.5 Connecting to another tablet 4. Pair the keyboard case with your tablet. 1. Make sure the keyboard is turned on. (i) In your tablet’s Bluetooth settings page, select “TYPE-S”...
  • Page 7 TYPE-S — Thin and light protective keyboard case — For Samsung GALAXY Tab S 10.5 Using the keyboard case Two viewing positions If the status light turns red, charge the battery. For more information, The keyboard case provides two viewing see “Charging the keyboard battery.”...
  • Page 8: Status Light Indicators

    TYPE-S — Thin and light protective keyboard case — For Samsung GALAXY Tab S 10.5 Status light indicators Bluetooth and battery status light Light Description Blinking green The battery is charging. Green The battery is charged (more than 10%). Battery power is low (less than 10%). Recharge the battery. Blinking blue Fast: The keyboard is in discovery mode, ready for pairing.
  • Page 9: Function Keys

    TYPE-S — Thin and light protective keyboard case — For Samsung GALAXY Tab S 10.5 Function keys FN + Caps Lock: FN + Back: Esc Quick panel/Notifications FN + 1: Lock screen Lock or unlock the tablet screen FN + X: Cut FN + 2: Web browser FN + C: Copy FN + 3: Mail...
  • Page 10: Battery Information

    TYPE-S — Thin and light protective keyboard case — For Samsung GALAXY Tab S 10.5 Charging the keyboard battery Battery information If the status light is red the keyboard case battery needs to be charged. • A fully charged battery provides about 1.
  • Page 11 TYPE-S — Thin and light protective keyboard case — For Samsung GALAXY Tab S 10.5 Battery disposal at product end of life 1. Pry off top cover of keyboard with screwdriver. 2. Detach battery from circuit board and remove battery. 3.
  • Page 12 TYPE-S — Thin and light protective keyboard case — For Samsung GALAXY Tab S 10.5 When you’ve finished using the keyboard case Detaching your tablet Storing your tablet for travel 1. Insert your tablet in the tablet holder. 1. Release your tablet from the hook: 2.
  • Page 13: Troubleshooting

    “TYPE-S” in the list of Available devices. The status light on Go to: your keyboard turns solid blue when www.logitech.com/support/type-s Bluetooth connection is established. What do you think? Thank you for purchasing our product. Please take a minute to tell us what you think of it.
  • Page 14 TYPE-S — aK1060 键盘保护套 适用于 Samsung GALAXY Tab S 10.5 了解您的产品 1. 平板电脑支架 2. 保护盒 3. 挂钩 4. 磁体 5. 功能键 6. 键盘 7. 蓝牙/电池状态指示灯 8. 蓝牙连接按钮 9. 开启/关闭开关 10. 微型 USB 充电端口 11. 微型 USB 充电连接线 12. 产品文档 TYPE-S TYPE-S aK1060 键盘保护套...
  • Page 15 TYPE-S — aK1060 键盘保护套 适用于 Samsung GALAXY Tab S 10.5 设置键盘保护套 入门指南 3. 提起保护套背面,向前滑动挂钩, 直到挂钩与磁体对齐,将键盘保护套移 1. 打开键盘保护套,将 Samsung GALAXY Tab S 10.5 推入平板电 动至打字位置: 脑支架: 2. 将 Samsung GALAXY Tab S 10.5 向下推入挂钩: 15  简体中文...
  • Page 16 TYPE-S — aK1060 键盘保护套 适用于 Samsung GALAXY Tab S 10.5 连接键盘和平板电脑 2. 确保平板电脑的蓝牙功能已开启。 键盘保护套与平板电脑之间通过蓝牙进行 应用程序 设置 在主屏幕上触击 网络连接部分,然后开启蓝牙开关。 连接。首次使用键盘保护套时,必须将键 盘与平板电脑进行配对。 3. 将键盘保护套与平板电脑配对。 (i) 在平板电脑的蓝牙设置页面,从可用 ® 设备列表中选择“TYPE-S”。 (ii) 根据提示,通过保护套键盘输入显 示的 PIN。 成功连接后,状态指示灯将在短时间内 变为稳定的蓝光,然后熄灭。 1. 开启键盘: 状态指示灯闪烁蓝灯(快速闪烁),表示 键盘处于可被搜索状态,可与平板电脑 进行配对。首次开启键盘后,键盘将保 持可被搜索状态 15 分钟。...
  • Page 17 TYPE-S — aK1060 键盘保护套 适用于 Samsung GALAXY Tab S 10.5 连接到其他平板电脑 1. 确保键盘处于开启状态。 2. 确保平板电脑的蓝牙功能已开启。 应用程序 设置 在主屏幕上触击 网络连接部分,然后开启蓝牙开关。 3. 按下蓝牙连接按钮: ® 状态指示灯闪烁蓝灯(快速闪烁),表示 键盘处于可被搜索状态,可与平板电脑 进行配对。键盘在 3 分钟内将处于可被 搜索状态。 4. 将键盘保护套与平板电脑配对。 (i) 在平板电脑的蓝牙设置页面,从可用 设备列表中选择“TYPE-S”。 (ii) 根据提示,通过保护套键盘输入显 示的 PIN。 成功连接后,状态指示灯将在短时间内 变为稳定的蓝光,然后熄灭。 17  简体中文...
  • Page 18 TYPE-S — aK1060 键盘保护套 适用于 Samsung GALAXY Tab S 10.5 使用键盘保护套 两种放置方式 如果状态指示灯变为红灯,请为电池 充电。有关详细信息,请参见“为键盘电 键盘保护套提供两种放置方式:一种用于 池充电”。 输入,一种用于浏览。 在处于输入位置时,如果有一段时间未 如要打字: 使用,则键盘会自动进入休眠模式。按任 1. 请将平板电脑支架放到适合输入的位置, 意键可将其唤醒。 将其与内置的磁体对齐以固定到位: 如要浏览,请将平板电脑支架置于浏览 位置: 浏览位置 打字位置 如您想节省电池电量,可关闭键盘。 2. 开启键盘: 18  简体中文...
  • Page 19 TYPE-S — aK1060 键盘保护套 适用于 Samsung GALAXY Tab S 10.5 状态指示灯 蓝牙和电池状态指示灯 指示灯 说明 闪烁绿灯 电池正在充电。 绿灯 电池有电(>10%)。 红灯 电量不足(<10%)。为电池充电。 闪烁蓝灯 快速: 键盘处于可被搜索状态,已准备好可以进行配对。 缓慢: 键盘正在尝试重新连接您的 Samsung GALAXY Tab S 10.5。 稳定蓝灯 蓝牙配对或重新连接成功。 19  简体中文...
  • Page 20 TYPE-S — aK1060 键盘保护套 适用于 Samsung GALAXY Tab S 10.5 功能键 FN + Caps Lock: FN + Back: Esc 快速面板/通知 FN + 1: 锁屏 锁定或解锁平板电脑屏幕 FN + X: 剪切 FN + 2: 网络浏览器 FN + C: 复制 FN + 3: 邮件...
  • Page 21 TYPE-S — aK1060 键盘保护套 适用于 Samsung GALAXY Tab S 10.5 为键盘电池充电 电池信息 如果状态指示灯变成红灯,则说明键盘保 护套的电池需要充电。 • 如果键盘每天使用约两个小时,则满电量 1. 将微型 USB 连接线的一端插入充电 电池可使用约三个月时间。 端口,将另一端插入电脑上的 USB • 在开启键盘之后,如果状态指示灯短暂亮 端口。 起红灯,请为电池充电。 电池充电过程中,状态指示灯将闪 • 不使用时,请关闭键盘以节省电池电量。 烁绿灯。 • 在处于输入位置时,如果有一段时间未 2. 为电池充电,直到状态指示灯变为稳定 使用,则键盘会自动进入休眠模式。按任 的绿灯为止。 意键即可将其唤醒。 21  简体中文...
  • Page 22 TYPE-S — aK1060 键盘保护套 适用于 Samsung GALAXY Tab S 10.5 电池废弃处置 1. 用螺丝刀撬开键盘的顶盖。 2. 从电路板上分离电池,取出电池。 3. 根据当地法律对产品和电池进行弃置。 22  简体中文...
  • Page 23 TYPE-S — aK1060 键盘保护套 适用于 Samsung GALAXY Tab S 10.5 键盘保护套使用完毕后 卸下平板电脑 旅行时收纳平板电脑 1. 将平板电脑插入平板电脑支架。 1. 将平板电脑从挂钩上取下: 2. 合上键盘保护套: 2. 将平板电脑滑离平板电脑支架: 之后便能够将平板电脑取出。 23  简体中文...
  • Page 24 TYPE-S — aK1060 键盘保护套 适用于 Samsung GALAXY Tab S 10.5 访问“产品支持” 疑难解答 我们的网站提供有关于本产品的详细信息 键盘不工作 和支持服务。请抽时间访问“产品支持”, • 按任意键即可将键盘从休眠模式中唤醒。 了解关于新键盘保护套的更多信息。 • 将键盘关闭,然后再将其重新开启。 浏览在线文章,查看安装帮助、使用技巧 • 为内置电池充电。有关详细信息, 以及关于更多功能的信息。 请参见“为键盘电池充电”。 通过“社区论坛”与其他用户交流,获得 • 确保在平板电脑的设置中已将蓝牙开启 建议,提出问题,分享解决方法。 应用程序 设置 网络连接部 “社区论坛”涵盖众多内容,其中包括: 分 蓝牙)。 • 教程 • 确保“TYPE-S”已同平板电脑配对 应用程序...
  • Page 25 © 2014 Logitech. All rights reserved. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered. Samsung, GALAXY and Tab S 10.5 are trademarks of Samsung Electronics Co., Ltd. Android, Google Play and Google Maps are trademarks of Google, Inc. All other trademarks are the property of their respective owners.

Table of Contents