Table of Contents
Advertisement
9. Technical Data
9.1 Specifications
Table 7 Inputs and Outputs
Property
Digital output
Relays
1)
Power supply input
Maximum current
Power consumption
Probe connector
Cable lead-throughs
Screw terminal wire size
1)
Using a power supply with overload protection is recommended for electrical safety.
2)
Depending on the production date of your transmitter, the power supply input voltage specification can be either 15 ... 30
VDC (20 ... 22 VAC) or 15 ... 30 VDC (24 VAC ±10 % 50/60Hz). Check the type label on the back of the transmitter for
information specific to your device.
Table 8 General
Display
Configuration interface
Wireless configuration interface browser support
Specification
RS-485 Modbus RTU
2 configurable relays (VAC/VDC)
Device maximum specification (resistive load):
• Max. switching power 30 W / 37.5 VA
UL-rated maximum specification (resistive load):
• AC: max. 28 V / 0.5 A
• DC: max. 40 V / 0.24 A
• Up to 30 VDC:
• max. switching current 1 A
• max. switching power 30 W
Range 15 ... 30 VDC (24 VAC ±10 % 50/60Hz)
Transmitter and connected probe max. 1 A
Transmitter max. 3 W (+ connected probe, varies
depending on probe type)
M12/5 connector for probe or probe cable connection
(Vaisala Indigo-compatible probes)
2 options: rubber lead-through on the bottom of the
transmitter, and opening with a seal at the back of the
transmitter
2
2
0.2 mm
... 1.5 mm
3.5" TFT LCD color display
Browser-based wireless configuration interface (IEEE
802.11 b/g/n WLAN)
• Microsoft Internet Explorer: version 11.0 onward
• Google Chrome: version 57 onward
• Mozilla Firefox: version 50 onward
• Apple Safari: version 10 onward
Chapter 9 – Technical Data
2)
65
Advertisement
Table of Contents
Troubleshooting
